---

/projects/cubeos/src_current/config/rcj_cam_config.h File Reference

#include <blocksize.h>

Include dependency graph for rcj_cam_config.h:

Go to the source code of this file.

Defines
#define	EPROM_BASE   0xe00000
#define	CPURAM_BASE   0xfff000
#define	PTIMER_VECTORNUM   64
#define	SCI_BASE   0xfffc00
#define	QSM_VECTORNUM   66
#define	TPU_BASE   0xfffe00
#define	TPU_VECTORBASE   0x80
#define	I2CA_BASE   0xffe200
#define	I2CA_VECTORNUM   27
#define	I2CB_BASE   0
#define	I2CB_VECTORNUM   0
#define	FASTBIN_BASE   0xfe0000
#define	RCJ_BASE   0xd00000
#define	RCJ_BLOCK   CSBLOCK_512K
#define	RCJ_CAM_BASE   RCJ_BASE
#define	RCJFB_BASE   RCJ_BASE+0x40000
#define	I2C_INITCSA   1

---

Define Documentation

#define CPURAM_BASE   0xfff000

Definition at line 23 of file rcj_cam_config.h.

#define EPROM_BASE   0xe00000

Definition at line 22 of file rcj_cam_config.h.

#define FASTBIN_BASE   0xfe0000

Definition at line 39 of file rcj_cam_config.h.

#define I2C_INITCSA   1

Definition at line 48 of file rcj_cam_config.h.

#define I2CA_BASE   0xffe200

Definition at line 31 of file rcj_cam_config.h.

#define I2CA_VECTORNUM   27

Definition at line 33 of file rcj_cam_config.h.

#define I2CB_BASE   0

Definition at line 36 of file rcj_cam_config.h.

#define I2CB_VECTORNUM   0

Definition at line 38 of file rcj_cam_config.h.

#define PTIMER_VECTORNUM   64

Definition at line 26 of file rcj_cam_config.h.

#define QSM_VECTORNUM   66

Definition at line 28 of file rcj_cam_config.h.

#define RCJ_BASE   0xd00000

Definition at line 41 of file rcj_cam_config.h.

#define RCJ_BLOCK   CSBLOCK_512K

Definition at line 42 of file rcj_cam_config.h. Referenced by RCJ_init.

#define RCJ_CAM_BASE   RCJ_BASE

Definition at line 44 of file rcj_cam_config.h.

#define RCJFB_BASE   RCJ_BASE+0x40000

Definition at line 45 of file rcj_cam_config.h.

#define SCI_BASE   0xfffc00

Definition at line 27 of file rcj_cam_config.h.

#define TPU_BASE   0xfffe00

Definition at line 29 of file rcj_cam_config.h.

#define TPU_VECTORBASE   0x80

Definition at line 30 of file rcj_cam_config.h.

---